Stem Kit Z750D/Z750FX/Z1000MK2

【Moriwaki 0532-201-100 Stem Kit Z750D/Z750FX/Z1000MK2】
Compatible models: KAWASAKI Z750D, Z750FX, Z1000MK2
Fork diameter: φ36mm
Fork span: 185mm
Fork offset: 50mm
Stem nut tightening torque: 10.5kgf-m
Handlebar holder (upper and lower) tightening torque: 2.7kgf-m
Stem/top bridge tightening torque: 2.2kgf-m
Handlebar holder to top bridge tightening torque: 3.9kgf-m
・This product is for racing only. Therefore, do not ride it outside of a race track.
・For installation and removal of standard parts related to this product, please refer to the service manual.
・Stem bearings are not included. Please use standard ones or ones of the same dimensions.
・For tightening the handlebar holder, point the punch mark on the upper holder in the direction of travel. Also, tighten from the front side in the direction of travel.
・The meter stay can accommodate Z750D/Z750FX-1/Z1000MK2 types. Z1/Z2 series and Z1-R series have different meter stay shapes, so normal meters cannot be installed.
・Handlebar lock is not possible.
・After installing the stem, thoroughly check for interference with other parts.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.