Tough Track Rail (Top-loading/Adhesive Type) Adhesive Surface 180x133mm Black, 1 pc.

【RAM MOUNTS RAP-398-BLK-TRACK-AU Tough Track Rail (Top-Loading/Adhesive) Adhesive Surface 180x133mm Black 1 piece】
■Product Description
A base part that allows you to install a rail on a flat surface with strong double-sided tape.
An adhesive rail part to which RAM MOUNTS' "Trackball Base" series can be attached.
It can be attached to various places, including the flat surface of a boat hull, with strong 3M double-sided tape.
By combining it with other trackball base parts, you can freely construct a mount.

Specifications
Color: Black
●Product Dimensions
Overall length: 177.8mm (rail part overall length 184mm)
Overall width: 136.5mm
Weight [grams]: 318g
Material [Material]: High strength composite
Specifications: Overall length 9.5cm / Adhesive type
Size: Top-Loading series
Product category: Track rail
Related products: Part number: P072-6435, P105-2182
Quantity: 1 piece

Set contents/accessories
Mounting screws, 7.12inch x 5.25inch double-sided adhesive pad, alcohol degreasing pad

Precautions
●Mounting method
1. Degrease the mounting area using the included alcohol pad or a separate parts cleaner.
2. Warm the mounting area and the adhesive surface of the product appropriately with a hairdryer, etc.
3. Peel off the protective tape from the adhesive surface of the product and attach it to the mounting area by pressing firmly.
4. Do not apply heavy load for at least 24 hours until the adhesive strength stabilizes.
*Pressure-sensitive adhesive manufactured by 3M is used for the adhesive surface.
*In low temperature environments, sufficient initial adhesive strength may not be obtained, which may cause it to fall off. Depending on the surrounding environment, warm the mounting area and the adhesive surface of the product to about 20 degrees Celsius before attaching.
*A separate primer may be required for adhesion to PVA, EVA, polystyrene, and some painted surfaces.
*Sufficient adhesive strength may not be achieved when adhering to polypropylene, polyethylene, or rubber materials.
*When installing, firmly fix it using a commercially available threadlocker adhesive as appropriate, depending on the usage environment and the mounting location.
*Always choose a ball size with a load capacity suitable for your intended use. In addition, to prevent accidental drops, use a fall prevention strap for the attached device.
*Due to the manufacturing process, some color unevenness, peeling, or burrs may be observed in the coating film on the product surface.

■Notes on images
*Images are for illustrative purposes only. Includes products of different sizes and colors. Product design and specifications are subject to change without notice. Please be aware.