Spline Post (Adhesive Type) Adhesive Surface 180x133mm Black 1 pc.

RAM Mounts RAP-398-BLK-114BMPU Spline Post (Adhesive Mount) Adhesive Surface 180X133mm Black, 1pc]
■Product Description
An adhesive-type receiver part that can be attached to the "Spline Post Base" series from RAM MOUNTS.
It can be attached to various locations, including flat surfaces of boats, using strong 3M double-sided tape.

Specifications
Color: Black
●Product Dimensions
Overall Length: 177.8mm
Overall Width: 136.5mm
●Mounting Locations
Automobile dashboards
Smooth flat surfaces
Flat parts of boats, etc.
●Mounting Method
1. Degrease the mounting surface using the included alcohol pad or a separate parts cleaner.
2. Warm the mounting surface and the product's adhesive surface appropriately with a hairdryer or similar device.
3. Peel off the protective tape from the product's adhesive surface and press it onto the mounting location.
4. Do not apply heavy loads for at least 24 hours until the adhesive strength stabilizes.
Weight [grams]: 386g
Material: High-strength composite
Type: Adhesive mount
Product Category: Spline Post
Quantity: 1 piece

Set Contents/Accessories
Mounting screws, 7.12inch x 5.25inch double-sided adhesive pad, alcohol degreasing pad

Precautions
*This product is not intended for outdoor use, such as mounting on a moving vehicle. In cold weather, the initial adhesive strength may decrease, so thoroughly warm the adhesive surface of the main unit and the installation surface, and degrease the installation surface before mounting.
*The adhesive surface uses 3M pressure-sensitive adhesive.
*In low-temperature environments, sufficient initial adhesive strength may not be achieved, leading to detachment. Depending on the surrounding environment, warm the mounting location and the product's adhesive surface to about 20 degrees Celsius before applying.
*A separate primer may be required for adhesion to PVA, EVA, polystyrene, and some painted surfaces.
*Adhesion to polypropylene, polyethylene, rubber materials, etc., may not provide sufficient adhesive strength.
*When installing, securely fix the product using commercially available threadlocking adhesive or similar, as needed, depending on the usage environment and installation location.
*Always choose a ball size with an appropriate load capacity for your intended use. Also, use a safety strap or similar for mounted devices to prevent accidental detachment.
*Due to the manufacturing process, some uneven color, peeling, or burrs may be observed in the coating film on the product surface.

■Image Precautions
*Images are for illustration purposes only. Products of different sizes and colors are included. Product design and specifications may change without notice. Please be aware.