Ratchet Tie-Downs, Black, 2-Pack

[POWER Power PR065BK Ratchet Tie-Down Black, Set of 2, Rough & Road]
Product Information:
・Easy to secure even in tight spaces, one-touch release with quick release.
[How to use]
(1) Hook the shorter belt to the motorcycle to be loaded.
*Choose a location that will not shift after securing and can withstand the load. Be careful not to damage the vehicle or carrier with the ratchet body.
(2) Hook the longer belt to a load-bearing location, such as the floor of the vehicle being transported.
(3) Pull the slack out of the long belt and tighten the ratchet.
*At this time, wind the excess belt so that it rolls up straight.
*Be careful to avoid twisting the belt.
*The ratchet can be wound with light force. Do not overtighten.
(4) Balance left and right, and confirm that the vehicle is not wobbly and that there are no problems with the hooks and where they are attached. Also, pay attention to interference between the carrier vehicle and the motorcycle.
(5) To release the ratchet, pull the release hook and open the body 180 degrees.
*When releasing, the motorcycle will move significantly due to the suspension returning. Be sure to firmly support the vehicle body while performing this.
・Color: Black
・Load capacity: 500kg
・Size: 180cm x 25mm
・Hooks: Vinyl coated, 25mm width
・Quantity: Set of 2
*Images are for illustration purposes only, and the design and specifications of the products listed are subject to change without notice. Thank you for your understanding.