TL1000R Dark Mesh Clutch Hose Master Cylinder Set

【TL1000R Mesh Brake Hose Clutch Hose Rear Clear Hose Smoke Hose Mesh Brake Hose TL1000R 98- Vertex】
This is a great value product that includes a Nissin master cylinder and clutch hose.
As it is a vehicle-specific set, it can be installed if it fits your vehicle.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, making speed control easier and shortening the braking distance.
As these are custom parts, the routing and length may differ from genuine parts.
The images are for illustration purposes only.
Depending on the vehicle model, some master cylinder colors or types shown in the images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual included parts will vary depending on the vehicle model.
Please provide brake fluid separately.

Hose details: Smoke hose, Black/Black (Aluminum)

Clamp holder has mirror hole (M10 x P1.25 right-hand thread included).
Exclusively for handlebars with an outer diameter of Φ22.2.
Never use any lever other than the specified one.
Please be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, leading to fluid leaks or air entrapment.
Please refer to the body dimension diagram to ensure sufficient installation space.

◆About Brake Fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades over long periods of use by absorbing moisture from the air.
(*Fluid degradation also progresses during storage.)
If the moisture content in the brake fluid increases, it can easily boil due to the heat generated during braking, rust components within the hydraulic system, and potentially lead to reduced brake or clutch performance or unexpected problems.
Regular replacement every two years is required for normal use.
If significant degradation is observed, early replacement of the brake fluid will be necessary.

Always check the specifications and instruction manual for the master cylinder you plan to purchase on the manufacturer's website (Daytona) beforehand.

Selectable manufacturer part numbers:
Daytona 78400 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 78402 (Vertical φ19 Black/Black/Clear Tank)
Daytona 64208 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 64207 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95657 (Vertical φ19 Black/Silver/Smoke Tank)
Daytona 95658 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 61748 (Horizontal 14mm Silver/Buff Clear/Clear Tank)
Daytona 61756 (Horizontal 14mm Gold/Buff Clear/Clear Tank)
Daytona 61757 (Horizontal 14mm Black/Buff Clear/Clear Tank)
Daytona 61751 (Horizontal 14mm Black/Black/Clear Tank)

Compatible models: TL1000R (Year 98-00, Model VT52A)

Installation details: Clutch (1 piece)

Please inquire before ordering and confirm on the manufacturer's website or similar.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered by the manufacturer or out of stock.
Please check the size and design before ordering.
The color of the product image may differ slightly from the actual product due to your PC or mobile phone environment.