Inazuma 1200 Mesh Clutch Hose Master Cylinder Set

【Inazuma 1200 Mesh Brake Hose Clutch Hose Rear Clear Hose Smoke Hose Mesh Brake Hose Inazuma 1200 Vertex】
This is a great value product that includes a Nissin master cylinder and clutch hose set.
It is a vehicle-specific set, so it can be installed on compatible vehicles.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, making speed control easier and shortening braking distances.
As these are custom parts, the routing and length may differ from genuine parts.
The image is for illustrative purposes only.
Depending on the vehicle model, some of the master cylinder colors or types shown in the images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual included parts will vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Clear hose, Blue/Red (Aluminum)

Clamp holder with mirror hole (M10 x P1.25 standard thread included)
For handlebars with an outer diameter of Φ22.2 only.
Never use any lever other than the specified one.
Please note that overtightening the air bleeder may crush the bleeder hole or tip, leading to fluid leaks or air entrapment.
Please refer to the body dimension diagram and ensure that sufficient installation space can be secured.

◆About Brake Fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid deteriorates over time due to absorption of moisture from the air.
(*Fluid deterioration also progresses even during storage.)
If the moisture content in the brake fluid increases, it can easily boil due to heat during braking, corrode components within the hydraulic system, and potentially lead to reduced brake or clutch performance or unexpected problems.
Regular replacement every 2 years is required for normal use.
If significant deterioration is observed, early replacement of the brake fluid is necessary.

Please be sure to check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's website (Daytona) beforehand.

Selected manufacturer part numbers:
Daytona 78400 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 78402 (Vertical φ19 Black/Black/Clear Tank)
Daytona 64208 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 64207 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95657 (Vertical φ19 Black/Silver/Smoke Tank)
Daytona 95658 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 61748 (Horizontal 14mm Silver/Buff Clear/Clear Tank)
Daytona 61756 (Horizontal 14mm Gold/Buff Clear/Clear Tank)
Daytona 61757 (Horizontal 14mm Black/Buff Clear/Clear Tank)
Daytona 61751 (Horizontal 14mm Black/Black/Clear Tank)

Compatible model: Inazuma 1200 (Model year 96-00, model GV76A)

Installation details: Clutch (1 hose)

Please be sure to inquire before ordering or check on the manufacturer's website.
For detailed product information, please check the manufacturer's website.
Some products may be backordered or out of stock due to manufacturer取り寄せ.
Please check the size and design before ordering.
The color of the product image may differ slightly from the actual product due to your PC or mobile phone environment.