Inazuma 1200 Dark Mesh Clutch Hose Master Cylinder Set

【Inazuma 1200 Mesh Brake Hose Clutch Hose Rear Clear Hose Smoke Hose Mesh Brake Hose Inazuma 1200 Vertex】
This is a great value product that includes a Nissin master cylinder and clutch hose set.
Since it is a vehicle-specific set, it can be installed on compatible vehicles.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, making speed control easier and shortening the braking distance.
Since these are custom parts, the routing and length may differ from genuine parts.
The image shown is for illustration purposes only.
Depending on the vehicle model, some of the master cylinder colors and types shown in the images may not be available for selection.
Sets that are not available for selection cannot be sold.
The actual included parts will vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Smoke hose, black/black (aluminum)

Clamp holder has a mirror hole (M10 x P1.25 right-hand thread included)
Exclusively for handle outer diameter Φ22.2.
Never use levers other than the specified ones.
Please note that overtightening the air bleeder can crush the bleeder hole or tip, leading to fluid leaks or air entrapment.
Please refer to the main body dimension diagram and ensure that sufficient installation space can be secured.

◆About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid deteriorates over long periods of use by absorbing moisture from the air.
(*Deterioration of fluid progresses even in storage conditions.)
If there is a lot of moisture in the brake fluid, it may boil easily due to the heat generated during braking, rust components within the hydraulic system, and potentially lead to a decrease in brake or clutch performance or unexpected problems.
Regular replacement every 2 years is required for normal use.
If significant deterioration is observed, early replacement of the brake fluid will be necessary.

Always check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's website (Daytona) in advance.

Selected manufacturer part numbers:
Daytona 78400 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 78402 (Vertical φ19 Black/Black/Clear Tank)
Daytona 64208 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 64207 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95657 (Vertical φ19 Black/Silver/Smoke Tank)
Daytona 95658 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 61748 (Horizontal 14mm Silver/Buff Clear/Clear Tank)
Daytona 61756 (Horizontal 14mm Gold/Buff Clear/Clear Tank)
Daytona 61757 (Horizontal 14mm Black/Buff Clear/Clear Tank)
Daytona 61751 (Horizontal 14mm Black/Black/Clear Tank)

Compatible models: Inazuma 1200 (Year 96-00, Model GV76A)

Installation details: Clutch (1 piece)

Please inquire in advance of placing an order and confirm on the manufacturer's website.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered or out of stock due to manufacturer availability.
Please be sure to check the size and design before ordering.
The color of the product image may differ slightly from the actual product due to the environment of your PC or mobile phone.