1 4

Inazuma 1200 Dark Mesh Brake Hose Master Cylinder Set

Inazuma 1200 Dark Mesh Brake Hose Master Cylinder Set

バーテックス(VERTEX)

s3022-fwd333-10-d1

¥26,477
¥26,477
Sale Sold out
Taxes included. Shipping calculated at checkout.
265 points to be awarded
型番
Color (Cylinder/Lever/Tank)
Length
【INAZUMA 1200 Mesh Brake Hose Clutch Hose Rear Clear Hose Smoke Hose Mesh Brake Hose INAZUMA 1200 Vertex】
This is a great value product that includes a Nissin master cylinder and brake hose set.
Since it is a vehicle-specific set, it can be installed if it is a compatible vehicle.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, makes speed control easier, and shortens braking distance.
As this is a custom part, the routing, length, etc. may differ from the genuine product.
Images are for illustration purposes only.
Depending on the vehicle model, the color or type of master cylinder shown in some images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual included parts may vary depending on the vehicle model.
Please provide brake fluid separately.

Hose details: Smoke hose, black/black (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 normal thread included).
For handlebars with an outer diameter of Φ22.2 only.
Never use a lever other than the specified one.
If the air bleeder is overtightened, the bleeder hole or tip may be crushed, causing fluid leakage or air lock, so please be careful.
Please refer to the body dimension diagram and make sure there is sufficient installation space.

◆About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid absorbs moisture from the air and deteriorates over long periods of use.
(※Fluid deterioration progresses even in storage.)
If the water content in the brake fluid increases, it may boil easily due to the heat generated during braking, rust components in the hydraulic system, and cause a decrease in brake or clutch performance or unexpected trouble.
Regular replacement is required every 2 years under normal use.
If significant deterioration is observed, early replacement of the brake fluid is necessary.

Please be sure to check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's (Daytona) website in advance.

Selectable manufacturer part numbers:
Daytona 79882 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 79883 (Vertical φ19 Black/Black/Clear Tank)
Daytona 79884 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 79885 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95653 (Vertical φ19 Black/Buff Clear/Smoke Tank)
Daytona 95654 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 96872 (Vertical φ19 Black/Buff Clear/Smoke Tank Short Lever)
Daytona 61745 (Horizontal 5/8 inch Silver/Buff Clear/Clear Tank)
Daytona 61744 (Horizontal 5/8 inch Gold/Buff Clear/Clear Tank)
Daytona 61747 (Horizontal 5/8 inch Black/Buff Clear/Clear Tank)
Daytona 61738 (Horizontal 5/8 inch Black/Black/Clear Tank)
Daytona 61746 (Horizontal 5/8 inch Gold/Black/Clear Tank)
Daytona 62411 (Diagonal Horizontal φ19 Black/Buff Clear/Clear Tank)
Daytona 74751 (Round Integrated 5/8 inch Black/Buff Clear/Clear Tank)

Compatible vehicle: Inazuma 1200 (Model year 96-00, Model GV76A)

Installation details: Front (2 lines)

Please inquire before ordering or check on the manufacturer's website.
For detailed product information, please check the manufacturer's website.
Some products may be out of production or out of stock due to manufacturer backorder.
Please confirm the size and design before ordering.
The color of the product image may differ slightly from the actual product due to the environment of your PC or mobile phone.

適合車種の情報は現在登録されていません。

View full details