1 4

SV650 (handlebar) Mesh Brake Hose and Master Cylinder Set

SV650 (handlebar) Mesh Brake Hose and Master Cylinder Set

バーテックス(VERTEX)

s3025-fwd121-10-d1

¥26,477
¥26,477
Sale Sold out
Taxes included. Shipping calculated at checkout.
265 points to be awarded
Model number
カラー(シリンダー/レバー/タンク)
長さ
【SV650 Mesh Brake Hose Front Clear Hose Smoke Hose Mesh Brake Hose SV650 (Pipe Handle) 99-02 Vertex】
This is a great value product that includes a Nissin master cylinder and brake hose set.
Since it is a vehicle-specific set, it can be installed if it is compatible with your vehicle.

Mesh hoses prevent expansion compared to rubber hoses, reducing brake pedal play, making speed control easier, and shortening braking distance.
As this is an aftermarket part, the routing and length may differ from the genuine product.
Images are for illustration purposes only.
Depending on the vehicle model, the color or type of master cylinder shown in some images may not be available for selection.
Sets that are not available for selection cannot be sold.
The actual included parts will vary depending on the vehicle model.
Brake fluid must be prepared separately.

Hose details: Clear hose, Blue/Red (Aluminum)

Clamp holder has mirror hole (M10 x P1.25 right-hand thread included).
For handlebars with an outer diameter of Φ22.2 only.
Never use any lever other than the specified one.
Be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, leading to fluid leaks or air entrapment.
Please refer to the main body dimension diagram to ensure sufficient installation space can be secured.

◆ About Brake Fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades by absorbing moisture from the air with long-term use.
(*Degradation of fluid also progresses during storage.)
If the brake fluid contains too much moisture, it may boil easily due to the heat generated during braking, rust the components in the hydraulic system, and potentially lead to a decrease in brake or clutch performance or unexpected problems.
Regular replacement is required every two years under normal use.
If significant degradation is observed, early replacement of the brake fluid will be necessary.

Please check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's website (Daytona) in advance.

Selected Manufacturer Part Numbers:
Daytona 79882 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 79883 (Vertical φ19 Black/Black/Clear Tank)
Daytona 79884 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 79885 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95653 (Vertical φ19 Black/Buff Clear/Smoke Tank)
Daytona 95654 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 96872 (Vertical φ19 Black/Buff Clear/Smoke Tank Short Lever)
Daytona 61745 (Horizontal 5/8 inch Silver/Buff Clear/Clear Tank)
Daytona 61744 (Horizontal 5/8 inch Gold/Buff Clear/Clear Tank)
Daytona 61747 (Horizontal 5/8 inch Black/Buff Clear/Clear Tank)
Daytona 61738 (Horizontal 5/8 inch Black/Black/Clear Tank)
Daytona 61746 (Horizontal 5/8 inch Gold/Black/Clear Tank)
Daytona 62411 (Angled Horizontal φ19 Black/Buff Clear/Clear Tank)
Daytona 74751 (Round Integrated 5/8 inch Black/Buff Clear/Clear Tank)

Compatible models: SV650 (pipe handle) (Year 99, Model BC-VP52A)

Installation details: Front (2 lines)

Please inquire before ordering and confirm on the manufacturer's website or similar.
For detailed product information, please check the manufacturer's website.
Some products may be backordered or discontinued by the manufacturer.
Please confirm the size and design before ordering.
The color of the product in the image may differ slightly from the actual product due to the environment of your PC or mobile phone.

適合車種の情報は現在登録されていません。

View full details