1 4

Inazuma 400 Dark Mesh Brake Hose Master Cylinder Set

Inazuma 400 Dark Mesh Brake Hose Master Cylinder Set

バーテックス(VERTEX)

s3065-fwd333-10-d1

¥26,477
¥26,477
Sale Sold out
Taxes included. Shipping calculated at checkout.
265 points to be awarded
型番
Color (Cylinder/Lever/Tank)
Length
【Inazuma 400 Mesh Brake Hose Front Rear Clear Hose Smoke Hose Mesh Brake Hose Inazuma 400 Vertex】
This is a great value product that includes a Nissin master cylinder and brake hose set.
As it is a vehicle-specific set, it can be installed on compatible vehicles.

Mesh hoses play a role in preventing expansion compared to rubber hoses, which reduces play in the brake pedal, makes speed control easier, and shortens braking distance.
As these are custom parts, the routing and length may differ from genuine parts.
The images are for illustration purposes only.
Depending on the vehicle, the color or type of master cylinder shown in some images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual included parts will vary depending on the vehicle.
Please prepare brake fluid separately.

Hose details: Smoke hose, black/black (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 standard thread included).
For handlebars with an outer diameter of Φ22.2 only.
Never use any levers other than the specified ones.
Please be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, leading to fluid leaks or air lock.
Please refer to the body dimension diagram and ensure that sufficient installation space can be secured.

◆About Brake Fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades by absorbing moisture from the air with long-term use.
(*Fluid degradation also progresses even in storage conditions.)
If the moisture content in the brake fluid increases, it can easily boil due to the heat during braking, rust components within the hydraulic system, and potentially cause a decrease in brake or clutch performance or unexpected problems.
Regular replacement every 2 years is required for normal use.
If significant deterioration is observed, early replacement of the brake fluid is necessary.

Please always check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's website (Daytona) in advance.

Selected Manufacturer Part Numbers:
Daytona 79882 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 79883 (Vertical φ19 Black/Black/Clear Tank)
Daytona 79884 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 79885 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95653 (Vertical φ19 Black/Buff Clear/Smoke Tank)
Daytona 95654 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 96872 (Vertical φ19 Black/Buff Clear/Smoke Tank Short Lever)
Daytona 61745 (Horizontal 5/8 inch Silver/Buff Clear/Clear Tank)
Daytona 61744 (Horizontal 5/8 inch Gold/Buff Clear/Clear Tank)
Daytona 61747 (Horizontal 5/8 inch Black/Buff Clear/Clear Tank)
Daytona 61738 (Horizontal 5/8 inch Black/Black/Clear Tank)
Daytona 61746 (Horizontal 5/8 inch Gold/Black/Clear Tank)
Daytona 62411 (Diagonal Horizontal φ19 Black/Buff Clear/Clear Tank)
Daytona 74751 (Round Integrated 5/8 inch Black/Buff Clear/Clear Tank)

Compatible vehicle: Inazuma 400 (Year 97-00, Model GK7BA)

Installation details: Front (2 hoses)

Please be sure to inquire and check the manufacturer's website before ordering.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered from the manufacturer, discontinued, or out of stock.
Please check the size and design carefully before ordering.
The actual product may differ slightly in color from the image depending on your PC or mobile phone environment.

適合車種の情報は現在登録されていません。

View full details