Hyper S-Stage Bore Up Kit 80cc APE50 FI Type D

Details:
・"Hyper S-Stage Bore Up Kit" that achieves engine output and torque entirely different from the normal engine
・Bore diameter 53.5mm / Displacement 80cc / Compression ratio 11.5:1
・The Hyper S-Stage Bore Up Kit includes the S-Stage Bore Up Kit 80cc, an FI Con 2 (injection controller) to correct fuel mixture deviations due to increased displacement, a 35T driven sprocket to change the reduction ratio, and a spark plug (NGK-CR8HSA). Further power increase is possible by simultaneously installing optional air filters and mufflers.
・FI Con 2 (Injection Controller): This is an injection controller uniquely developed by Takegawa that does not require troublesome PC connection and allows easy setting changes by switching the rotary switch on the main unit. Despite its compact body, it has a built-in 3D correction map pre-set for Takegawa's S-Stage bore-up kit. It also has an increment/decrement function that allows fine adjustment of the built-in correction map to be richer or leaner overall using the rotary switch on the main unit. The rev limit also increases to approximately 11,500 rpm, exceeding the stock ECU.
・Simultaneous installation of Takegawa's air filter is recommended. *Precautions:
・Not compatible with APE50 (FI/AC16-1600001~) because the wheels are different and the driven sprocket cannot be installed.
・Precautions for FI Con 2 (Injection Controller): FI Con 2 is exclusively for vehicles equipped with the S-Stage Bore Up Kit 80cc.
It cannot be used with normal engine specification vehicles.
・Cannot be used simultaneously with H.I.D. and other manufacturers' LED headlights.
・Do not use with aftermarket ignition devices, as the increased ignition voltage can lead to increased radiated noise, causing malfunction or product failure. Compatible models: HONDA APE50 FI TypeD (APE50FI Type D) / AC18-1000001~
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware.