Super Oil Pump Kit with Relief Valve Function Z125 Pro KSR110 KLX110

【SP武川 01-16-0072 Super Oil Pump Kit with Relief Valve Function for Z125 Pro KSR110 KLX110 Engine Parts Takegawa】
■Product Description
A super oil pump kit that incorporates a relief valve function into the pump body to achieve optimal oil discharge volume.

■Detailed Description
SP Takegawa has adopted an approximately 40% increase in oil delivery compared to the stock pump to ensure proper oil volume, oil pressure, and oil levels in each part of the engine.
By circulating the appropriate amount of oil, the burden on moving parts is reduced, cooling performance is improved, and a stable oil film can be maintained on lubricating surfaces.
Furthermore, by incorporating a relief valve function into the oil pump body, oil pressure can be controlled, reducing the burden on the engine due to increased oil pressure and achieving stable oil circulation.
●Essential for High-Spec Engine Vehicles
In high-spec engine vehicles equipped with SP Takegawa cylinder heads, etc., the oil level can become unstable and air entrapment may occur due to frequent use of high RPMs.
By installing this product, the oil level remains stable even at high RPMs, reducing power loss and allowing the engine to perform to its full potential.
●Adoption of Relief Valve Function for Oil Pressure Control
The SP Takegawa Super Oil Pump increases discharge volume by approximately 40% compared to stock. To ensure oil pressure during unstable idling and to accommodate changes in oil pressure with increasing RPMs, a relief valve function is installed in the oil line that opens only when a certain oil pressure is reached.
This suppresses excessive oil pressure increases during RPM acceleration when the engine is cold, and prevents damage to drive parts and seals.
Furthermore, at high engine RPMs, it prevents excessive oil discharge, reduces power loss, and stabilizes the oil level.
●Easy Installation by Simply Replacing the Stock Oil Pump
This product is an assembled unit that includes the oil pump driven gear, etc., so there is no need to reuse, disassemble, or assemble parts from the stock oil pump. It can be easily installed by simply replacing the stock oil pump.
※The stock bolts are reused to secure the oil pump. If the bolts are worn or damaged, they must be replaced with new ones.

■Compatible Models
Kawasaki
Z125 PRO (BR125H-A02621～)
KSR110 (KL110A-000001～/KL110A-A04501～)
KSR110 (KL110CBF)(JKAKL110CCDA00058～)
KSR110 (KL110DDF)(KL110CEA00001～)
KSR PRO (KL110EEF)(JKAKL110EEDA88121～)
KLX110 (LX110A-000001～)
KLX110 (LX110A-A08133～)
KLX110L (LX110D-A72046～)

■Notes
※The image is for illustration purposes only. It includes products with different sizes and colors.
※Product design and specifications are subject to change without notice. Please be aware of this.
※R. crankcase cover gasket and O-ring (genuine parts) are not included. They will be required for replacement, so please purchase them separately.
※Depending on the vehicle, the shape of the R. crankcase cover gasket and O-ring, and their genuine part numbers may differ. Please check your vehicle before purchasing.
※No drilling of the orifice hole in the crankcase is required.