Special Clutch Kit TYPE-R (WET/Cable-operated) Slipper Clutch Specification for Dax 50

【SP武川 02-01-0463 Special Clutch Kit TYPE-R (WET/Wire-operated) Slipper Clutch Specification for Dax 50 Engine Parts Takegawa】
■Product Description
Features a die-cast aluminum right crankcase cover and a forged aluminum clutch cover.
Special Clutch Kit (WET/Wire-operated) Slipper Clutch Specification

■Detailed Description
●Die-cast Aluminum R. Crankcase Cover
The right crankcase cover is made of die-cast aluminum.
The cover surface is silver painted.
The right crankcase cover is designed to be used with both wet and dry clutches.
Even after purchasing a special clutch (wet type), you can change it to a dry clutch specification.
*A separate purchase of SP Takegawa specified parts is required for specification changes.
●Forged Aluminum Clutch Cover (Wire-operated)
The wire-operated clutch adopts the highly acclaimed rack-and-pinion system for light and smooth operation.
The cover is made of forged aluminum and has a shot-blasted surface.
Even after installing the special clutch, the clutch springs, clutch plates, and clutch friction discs can be easily replaced by removing the clutch cover.
●Large Oil Filler Cap
The enlarged oil filler port makes oil changes easy.
Made of die-cast aluminum with a chrome-plated finish.
●Built-in Oil Element
Filters impurities such as sludge and metal wear particles in the oil.
By removing impurities from the oil, engine output can be maintained.
The oil element uses a reliable cartridge-type paper filter.
●Oil Level Check Window
Allows easy checking of the oil level.
The engine oil check window uses durable glass.
●Special Clutch Inner Kit TYPE-R (WET/Slipper Specification)
●Clutch Unit Change
By changing from the normal crankshaft (primary side) to the transmission main shaft (secondary side), the load on the crankshaft is reduced, and the crankshaft axis can be lightened, resulting in light throttle response.
●6-Disc Specification
Compared to conventional products, by reducing the diameter of rotating parts such as the clutch outer, it reduces horsepower loss due to oil diffusion, improves response further, and reduces rotational mass weight by approximately 12%, efficiently transmitting engine power.
Adopts 6 friction discs, achieving a 6-disc configuration. This increases the clutch capacity by approximately 20% compared to conventional products, making it compatible with high-power engines.
●Slipper Clutch (Standard Equipment)
Alleviates the shock of sudden engine braking during downshifts at high RPMs.
This reduces sudden changes in posture, rear wheel hopping, and stress on the engine.
●Slipper Clutch Structure
A dedicated pressure plate and clutch cam are provided in the clutch section.
Back torque transmitted from the rear wheel is conveyed to the clutch cam, causing the pressure plate cam and clutch cam to operate, pushing down the pressure plate to create a half-clutch state and releasing the back torque.
●Clutch Outer
Includes a built-in rubber damper to reduce shock from gears during clutch engagement.
●Die-cast Aluminum Lifter Plate
●Clutch Spring
Excellent fatigue resistance and provides a stable clutch feel.

■Compatible Models
HONDA
12V DAX50 (AB26-1000001～)
*Simultaneous installation of SP Takegawa's WET compatible cross mission (5-speed cross mission) is required.

■Notes
*The image is for illustration purposes only. It includes products with different sizes and colors.
*Product design and specifications are subject to change without notice. Please understand.
*Must be used in conjunction with a bore-up kit with decompression function. (Excluding SP Takegawa Desmo Head)
*Normal mufflers and up-mufflers cannot be installed simultaneously.
*Since the centrifugal clutch is changed to a manual type, separate clutch levers and turn signal switch set, etc., are required. (Refer to separate purchase parts in the instruction manual)
*This product is made to order, so cancellations after ordering are not possible.
*Since this is a build-to-order product, it may take some time for delivery. Also, the manufacturer may discontinue or change specifications without notice. Please be aware of this beforehand.