Special Clutch Kit TYPE-R (DRY/Cable Operated) Monkey Gorilla

【SP Takegawa 02-02-0035 Special Clutch Kit TYPE-R (Dry/Wire Operated) Monkey Gorilla Engine Parts Takegawa】
■Product Description
Dry clutch kit TYPE-R for high-spec engines.
Achieves increased clutch capacity with 6 discs while reducing rotational mass weight.
●Product Specifications
Wire-operated dry clutch
TYPE-R 6-disc (standard specification)
*Slipper clutch mechanism not included.

■Detailed Description
●Compatible Right Crankcase Cover Adopted
The right crankcase cover is made of die-cast aluminum.
The cover surface is silver painted.
The right crankcase cover is designed to be used with both wet and dry clutches.
Even after purchasing a dry clutch, you can change to a special clutch (wet type).
*A separate purchase of SP Takegawa specified parts is required for specification changes.
●Machined Aluminum Clutch Cover (Wire Operated)
Increased ventilation holes further enhance the cooling effect around the clutch outer. By removing the clutch cover, clutch springs, clutch plates, and clutch friction discs can be easily replaced.
The surface of the machined aluminum cover is silver anodized.
●Built-in Oil Element
Filters out impurities such as sludge and metal wear particles in the oil.
Removing impurities from the oil helps maintain engine output.
A reliable cartridge-type paper oil element is used.
●With Oil Level Confirmation Window
Allows checking the oil level.
Durable glass is used for the engine oil check window.
●Large Oil Filler Cap Adopted
Made of die-cast aluminum with chrome plating.
Enlarging the oil filler opening makes oil changes easier.
●Special Clutch Inner Kit TYPE-R (Dry/Standard Specification)
●Clutch Unit Change
By changing from the normal crankshaft (primary side) to the transmission's main shaft (secondary side), the rotational mass of the crankshaft is reduced, improving crankshaft durability and throttle response.
●6-disc Specification
Compared to conventional products, by reducing the diameter of rotating parts such as the clutch outer, further improvement in response and approximately 12% reduction in rotational mass weight are achieved, transmitting engine power without waste.
Achieved 6-disc configuration by adopting 6 friction discs.
This increases the clutch capacity by approximately 20% compared to conventional products, making it compatible with high-power engines.
●Standard Clutch Specification (No Slipper)
●Primary Driven Gear
Built-in rubber damper to reduce shock to gears etc. when engaging the clutch.
●Lifter Plate
The standard specification uses a machined aluminum lifter plate.
●Clutch Spring
Excellent fatigue resistance for stable clutch feel.

■Compatible Models
HONDA
6V Monkey/Gorilla (Z50J-1300017 to 1805927)
12V Monkey (Z50J-2000001 to / AB27-1000001 to 1899999)
12V Gorilla (Z50J-2500001 to / AB27-1000001 to 1899999)
Monkey (FI) (AB27-1900001 to)
*Simultaneous installation of SP Takegawa dry clutch 5-speed/6-speed cross mission is required.

■Notes
*Images are for illustration purposes only. Includes products with different sizes and colors.
*Product design and specifications are subject to change without notice. Please understand.
*Simultaneous installation of SP Takegawa dry clutch 5-speed/6-speed cross mission is required. Also, the cross mission kit part numbers differ between carburetor and fuel-injected Monkey models.
*Normal mufflers and up-type mufflers cannot be installed simultaneously.
*As this product is made-to-order, cancellations after ordering are not possible.
*This is a made-to-order product, so delivery may take some time. Also, please note that the manufacturer may discontinue the product or change specifications without prior notice. Thank you for your understanding.