Hyper ECU

【Takegawa 05-04-0207 Hyper ECU Ape50(FI) Ape50(FI)Type D Motorcycle Custom TAKEGAWA】
■Product Description
Unlike conventional sub-controllers that use the genuine ECU, this "Hyper ECU" controls everything.
The Hyper ECU controls everything, unlike conventional sub-controllers that use the genuine ECU.

・Easy installation by simply replacing the genuine ECU
Since the ECU unit uses the same coupler as the genuine ECU, no wiring modification is required, and it can be easily installed by simply replacing the genuine ECU.

・Built-in preset maps
Can be used for a wide range of vehicles, from stock engines to custom engine vehicles.
Since it has built-in maps pre-configured for each custom specification, settings can be easily made using the included switch. There is no need for a computer, smartphone, or downloading apps or software via an internet connection; settings can be made by operating the switch.
Preset maps (9 types built-in)

【Difference between conventional injection controllers and Hyper ECU】
Conventional injection controllers (sub-injection controllers) were interposed between the genuine ECU and performed signal adjustments for various sensors (ignition timing/engine temperature, etc.), fuel adjustments (fuel injection time/fuel acceleration injection, etc.), and idling area adjustments.
The Hyper ECU removes the genuine ECU and fully controls fuel adjustments, ignition timing, etc. based on signals from various sensors.
This allows you to maximize output performance across the entire RPM range by selecting setting data optimized for each engine specification.
In addition, like the genuine ECU, the Hyper ECU allows kick-starting and running even when the battery is dead (emergency only).
Engine starting with a dead battery is strictly for emergencies; prolonged running with a dead battery or a battery-less setup can lead to engine trouble or failure.
Do not use this product for running with a dead battery or with a battery-less vehicle except in emergencies.

【Built-in overall fuel adjustment function】
For vehicles equipped with SP Takegawa custom parts (engine/muffler), settings are completed by selecting the built-in preset map, but fine-tuning of fuel adjustment may be necessary depending on the vehicle's usage. Therefore, the Hyper ECU has a built-in fuel adjustment function that allows overall fuel adjustment in the range of -9% to +9%. (Adjustable in 1% increments)
Equipped with a rev limiter cut function.
Rev limit RPM for all maps is approximately 11000rpm.

■Compatible models
Ape50(FI)(AC16-1600001〜)
Ape50(FI)Type D(AC18-1000001～)

■Precautions
※This product is exclusively for vehicles equipped with SP Takegawa custom parts.
※Do not use in combination with engine parts from other manufacturers. This may cause engine trouble or failure.
※The rev limit RPM for all maps is approximately 11000rpm. The rev limit RPM cannot be changed.
※The speed warning light only operates when the 50cc MAP is selected. It will remain off when the S Stage MAP is selected.
※Absolutely do not use aftermarket H.I.D kits or LED headlights or fog lights from other manufacturers simultaneously.
※Some ballasts/inverters (voltage conversion devices) can generate high-voltage noise that adversely affects digital circuits, leading to product failure or malfunction.
※Aftermarket ignition devices (ignition coils or spark plug wires) should not be used as the increased ignition voltage can lead to increased radiated noise, causing malfunctions or product failure.
※Aftermarket power generators should not be used as insufficient power generation or differences in voltage waveforms can lead to failure.
※Do not use the headlight ON/OFF switch simultaneously.
※Images are for illustration purposes only. Includes products with different sizes and colors.
※Product design and specifications are subject to change without notice. Please be aware.