Heated Grips, Wrap-around Type, USB/TYPE-C, 100x130mm, Universal

【SP武川 05-12-0005 Heated Grips Wrap-Around Type USB/TYPE-C 100×130mm Universal Grip Heater for Winter Touring Takegawa】
■Product Description
This product is a wrap-around type heated grip that can be installed on handle grips with a diameter of φ32mm to φ35mm.
The wrap-around type is easy to install; simply wrap it around the handle grip and secure it with a hook-and-loop fastener.
It can be used on various handle grips, not just motorcycles, but also bicycles, lawnmowers, snow blowers, fishing rods, electric kickboards, etc.
In addition, as it adopts USB TYPE-C port power supply, it can be connected to the USB port of a portable mobile battery or a USB port installed in a vehicle.
Temperature adjustment can be selected from 5 levels.

■Detailed Description
●Adopts heat-generating PET metal film
Conventional grip heaters use heating wires, which take time to conduct heat and result in uneven heating.
Heat-generating PET metal film has excellent thermal conductivity and can heat uniformly.
Furthermore, unlike heating wires, heat-generating PET metal film makes surface contact with the handle grip, resulting in a larger heating area and rapid temperature increase while maintaining uniform temperature.
●Equipped with a controller for temperature setting
This product is equipped with a temperature setting controller on the USB TYPE-C connection cord.
The controller is located close to the USB TYPE-C connection, allowing for a stylish and compact setup.
In addition, it uses a mesh flat cable, making it easy to route and minimizing cable bulk.
●5-level temperature adjustment function
The controller allows for 5 levels of temperature control.
Also, a color lamp display is adopted, allowing you to visually confirm the temperature level.
Red: 100℃ Orange: 85℃ Yellow: 75℃ Green: 65℃ Blue: 55℃
Temperature adjustment is operated by a short press of the controller button, and power ON/OFF is done by a long press of the button.
●Equipped with a memory function to record temperature adjustments
Since the temperature control from the previous use is recorded, there is no need to readjust the temperature when turning the power on again.
The grips will warm up to the temperature setting from the previous use.
●Equipped with automatic warm-up function
The warm-up function heats the grip heater at high speed for 3 minutes from power-on.
After 3 minutes, the temperature is maintained at the designated temperature setting (designated color).

■Compatible Models
Universal

■Specifications
Type: TYPE-ROLL (Wrap-around type)
Heater part: 100mm × 130mm
Thickness: 2mm
Cable length: 1250mm (including USB connector part)
Grip width (overall length): 100mm or more
Grip diameter: Approximately φ32mm to φ35mm
Vehicle with USB port PD compatible 18W to MAX30W (12V 1.5A or more), or mobile battery use PD compatible 18W to MAX30W (12V 1.5A or more)
USB TYPE-C

■Precautions
*The image is for illustration purposes only. It includes products with different sizes and colors.
*Product design and specifications may change without prior notice. Please be aware of this.
*When using this product, a power supply USB TYPE-C port or a mobile battery with a USB TYPE-C port is required. If the USB port cannot stably output 12V 1.5A, the heat generation will be insufficient, and the product will not be able to perform its original capabilities. When simultaneously installing with other devices on an aftermarket USB 2-port type, it may also lead to insufficient heat generation. Mobile use time目安: 10000mA/h MAX level (when using red LED: 100℃) approx. 1.1 hours, LOW level (when using blue LED: 55℃) approx. 2.5 hours. This changes depending on the degradation state of the battery.
*Even if it is a USB TYPE-C port, it does not support 5V. Also, when connecting to a third-party USB TYPE-C port, the shape of the USB TYPE-C connector insertion port of this product may not match.
*While it can withstand rain and snow, the heated grips are not completely waterproof. If wet after use, please ensure they are completely dry before using them again.
*Please ensure the USB TYPE-C connector and USB TYPE-C port do not get wet with rain or snow, as this may cause malfunction.
*Heated grips tend to decrease in temperature when directly exposed to riding wind. Simultaneously installing knuckle guards or handlebar covers can help counter temperature drops.