Aluminum Billet 2-Piston Caliper, Black, 84mm Pitch, 34mm Piston

【Takegawa 06-08-0268 Aluminum Billet 2POT Caliper Black 84mm Pitch Piston φ34 Universal Motorcycle Aluminum TAKEGAWA】
■ Product Description
The "Aluminum Billet 2POT Caliper" offers excellent braking performance and enhanced design with colored alumite on machined aluminum.
This "Aluminum Billet 2POT Caliper" is meticulously machined from high-strength and durable aluminum, with a stylish colored alumite finish.
By installing this product, you can achieve excellent braking performance, making it suitable for a wide range of uses, from street riding to sports driving.
Furthermore, by adopting SP Takegawa's original internal structure and high-precision finishing down to the smallest detail, it allows for delicate brake feel during braking, significantly improving control performance.
The SP Takegawa logo is engraved in the center of the caliper and painted with heat-resistant paint.
Mounting Pitch: 84mm Piston Diameter: Φ34mm

【Product Configuration】
This product includes a banjo bolt for the caliper and two aluminum sealing washers.
The included banjo bolt and bleeder screw use M10 x P1.25.
The caliper body has two banjo bolt mounting points, allowing you to select the mounting position for the banjo bolt and bleeder screw from two locations depending on the vehicle specifications.

【Installation Requirements for Monkey 125, GROM, Dax 125 Front】
・Applicable Vehicles
Monkey 125 (JB02)(JB03)(JB05) including Thai models
GROM (JC92) MSX GROM (MLHJC92)
Dax 125 (JB04)(JB06) *Excluding Thai models
In addition to this product, simultaneous installation of the SP Takegawa Front Caliper Bracket Kit (06-08-0237) is required.
Regarding disc rotors, both the genuine front disc rotor and the SP Takegawa Front Floating Disc Rotor can be installed simultaneously.
For ABS vehicles, installation is possible with the genuine brake hose.
For non-ABS vehicles, a separate brake hose, banjo, and banjo bolt are required. The hose length and banjo angle may vary depending on the specifications of the handlebar pipe and front brake master cylinder, so confirmation is necessary.

【Installation Requirements for Monkey 125 Rear】
・Applicable Vehicles
Monkey 125 (JB02)(JB03)(JB05) including Thai models
In addition to this product, simultaneous installation of the SP Takegawa Rear Caliper Bracket Kit (06-08-0123) is required.
Regarding disc rotors, both the genuine rear disc rotor and the SP Takegawa Rear Disc Rotor can be installed.
A separate brake hose, banjo, and banjo bolt are required.

【Installation Requirements for Monkey/Gorilla (Carburetor Model) and Monkey (FI)】
・Applicable Vehicles
Monkey/Gorilla (Carburetor Model) and Monkey (FI)
Applicable specification: Vehicles equipped with 10-inch wheels

・For Front
When installing this product, simultaneous installation of various SP Takegawa Φ30 Front Fork Kits and the Front Caliper Bracket Kit (06-08-0212) is required.
Separately purchased parts required for converting to 10-inch wheels and installing the Φ30 Front Fork Kit will be necessary. Please refer to the web catalog.

・For Rear
When installing this product, simultaneous installation of various SP Takegawa Rear Disc Brake Kits and the Φ160 Disc Rotor & Bracket Kit (06-08-0030) is required.
Separately purchased parts required for converting to 10-inch wheels and installing the Rear Disc Brake Kit will be necessary. A separate brake hose, banjo, and banjo bolt are required.

■ Compatible Models
Universal
Mounting pitch: 84mm
(Same as Brembo 2POT calipers)

■ Specifications
Color: Black

■ Notes
*This product cannot be used directly with various genuine vehicles.
*When installing this product, simultaneous installation of a separately sold caliper bracket dedicated to the target vehicle is required.
*Various caliper brackets for Brembo 2POT calipers manufactured by SP Takegawa are compatible.
*Depending on vehicle specifications, separate purchase of brake hoses, banjos, and banjo bolts may be required.
*This product is a universal type.
*This product is similar to Brembo 2POT calipers, including those with a mounting pitch of 84mm (excluding Brembo machined aluminum types).
*As this is a universal product, depending on the disc rotor shape of the installed vehicle, there may be areas where the brake pads do not make contact. In such cases, for safety, confirm contact with the disc rotor and shave off any unnecessary parts of the brake pad.
*Images are for illustration purposes only. Includes products with different sizes and colors.
*Product design and specifications may change without prior notice. Please be aware of this.