Compact Cool Kit 4 Fin/Braided Hose #4 Monkey Gorilla

【SP Takegawa 07-07-0377 Compact Cool Kit 4 Fin/Braided Hose #4 Monkey Gorilla Oil Cooler Cooling Engine Parts Takegawa】
■Product Description
Oil cooler kit adopting #4 braided hose with an outer diameter of φ11mm, ideal for small vehicles.

■Detailed Description
The oil cooler body is attached to the steering stem of SP Takegawa's φ27 or φ30 front fork kit with an oil cooler stay and secured under the headlight.
Oil is extracted by installing the included oil cooler unit onto the oil filter cover of SP Takegawa's special clutch cover (with various filters) or dry clutch (Type 2).
●Braided Hose #4
This nylon braided hose has an outer diameter of φ11mm, making it ideal for small vehicles.
Additionally, with an inner diameter of φ5.6mm, it reduces the burden on the oil pump.
Nylon braided hose is lightweight and flexible, offering excellent freedom in routing.
When installed, the black braided hose gives the vehicle a more compact appearance.
●Compact Cool Body
The cooler body uses a compact cool system with excellent cooling efficiency.
By installing an oil cooler, you can suppress the rise in oil temperature associated with engine bore-up.
An oil cooler plate and guard are standard equipment.
The compact cool body is available with either 3 fins/4 oil lines or 4 fins/5 oil lines.

■Compatible Models
HONDA
12V Monkey/Gorilla (Z50J-1300017~/AB27-1000001~1899999)
Monkey (FI) (AB27-1900001~)
Vehicles equipped with SP Takegawa special clutch (sand cast, die-cast, TYPE-R WET/DRY)
Vehicles equipped with SP Takegawa dry clutch (Type 2 ver.1/ver.2)
Vehicles equipped with any of the above clutches

■Specifications
Type: 4 Fin/Braided Hose #4
Applicable to: SP Takegawa special clutch (sand cast, die-cast, TYPE-R WET/DRY), SP Takegawa dry clutch (Type 2 ver.1/ver.2)

■Notes
※Images are for illustration purposes only. Includes products with different sizes and colors.
※Product design and specifications are subject to change without notice. Please be aware.
※Exclusively for vehicles equipped with SP Takegawa φ27 front fork kit or φ30 front fork kit. The oil cooler stay is attached to the steering stem included in the kit.
※Cannot be installed on SP Takegawa inverted front fork kits.
※Applicable to vehicles equipped with SP Takegawa special clutch (sand cast, die-cast, TYPE-R WET/DRY) or dry clutch (Type 2 ver.1/ver.2). Can also be installed on the special clutch (die-cast) used in SP Takegawa complete engines (primary type).
※For vehicles equipped with SP Takegawa special clutch (die-cast), simultaneous installation of an oil hole plug or thermostat unit is not possible. Simultaneous installation will lead to serious engine trouble.
※Cannot be used simultaneously with normal mufflers or up-type mufflers.
※Please add approximately 40cc of oil for 3 fins and approximately 60cc for 4 fins to the standard oil quantity.
※This product is made to order, so cancellations after ordering are not possible.
※Due to made-to-order production, delivery may take some time. Also, there may be unannounced discontinuation by the manufacturer or specification changes. Thank you for your understanding.