Compact Cool Kit, 3-Fin/Blade Hose #4 for Monkey/Gorilla

[SP Takegawa 07-07-0378 Compact Cool Kit 3-Fin/Blade Hose #4 Monkey Gorilla Oil Cooler Cooling Engine Parts Takegawa]
■Product Description
An oil cooler kit featuring a #4 blade hose with an outer diameter of φ11mm, ideal for small vehicles.

■Detailed Description
The oil cooler body is fixed under the headlight by attaching the oil cooler stay to the steering stem included with SP Takegawa's φ27 or φ30 front fork kit.
The oil outlet takes oil by attaching the included oil cooler unit to the oil filter cover of SP Takegawa's special clutch cover (with various filters) or dry clutch (Type 2).
●Blade Hose #4
This nylon blade hose has an outer diameter of φ11mm, making it ideal for small vehicles.
Additionally, its inner diameter of φ5.6mm reduces the burden on the oil pump.
Nylon blade hoses are lightweight and flexible, offering excellent freedom in routing.
When installed, the black blade hose enhances the vehicle's appearance.
●Compact Cool Body
The cooler body uses a compact cool design with excellent cooling efficiency.
Installing an oil cooler can suppress the oil temperature rise associated with engine bore-up.
Oil cooler plates and guards are standard equipment.
The compact cool body is available in 3-fin 4-oil line and 4-fin 5-oil line options.

■Compatible Models
HONDA
12V Monkey/Gorilla (Z50J-1300017~/AB27-1000001~1899999)
Monkey (FI) (AB27-1900001~)
Vehicles equipped with one of the following clutches: SP Takegawa Special Clutch (Sand Cast/Die-Cast/TYPE-R WET/DRY), SP Takegawa Dry Clutch (Type 2 ver.1/ver.2)

■Specifications
Type: 3-fin/Blade Hose #4
Target: SP Takegawa Special Clutch (Sand Cast/Die-Cast/TYPE-R WET/DRY), SP Takegawa Dry Clutch (Type 2 ver.1/ver.2)

■Notes
※Images are for illustration purposes only. They may include products with different sizes or colors.
※Product design and specifications are subject to change without notice. Please be aware of this.
※Exclusively for vehicles equipped with SP Takegawa's φ27 front fork kit or φ30 front fork kit. The oil cooler stay is attached to the steering stem included in the kit.
※Cannot be installed on SP Takegawa's inverted front fork kit.
※Applicable to vehicles equipped with SP Takegawa Special Clutch (Sand Cast/Die-Cast/TYPE-R WET/DRY) or Dry Clutch (Type 2 ver.1/ver.2). Can also be installed on the Special Clutch (Die-Cast) used in SP Takegawa's complete engine (primary type).
※When equipped with SP Takegawa Special Clutch (Die-Cast), simultaneous installation of an oil hole plug or thermostat unit is not possible. Simultaneous installation will result in serious engine trouble.
※Normal mufflers and up-type mufflers cannot be installed simultaneously.
※Please add approximately 40cc for 3-fin and 60cc for 4-fin to the standard oil quantity.
※This product is made-to-order, so cancellations after ordering are not possible.
※As this is a made-to-order product, delivery may take some time. Also, please note that the manufacturer may discontinue the product or change specifications without prior notice.