Compact Cool Kit, 3-Fin/Blade Hose #4 for Monkey/Gorilla

【SP武川 07-07-0380 Compact Cool Kit 3-Fin/Braided Hose #4 Monkey Gorilla Oil Cooler Cooling Engine Parts Takegawa】
■Product Description
This oil cooler kit uses #4 braided hoses with an outer diameter of φ11mm, ideal for small vehicles.

■Detailed Description
The oil cooler body is fixed under the headlight by attaching the oil cooler stay to the steering stem included with SP Takegawa's φ27 or φ30 front fork kits.
Oil is extracted by attaching a banjo and banjo bolt to the oil port on SP Takegawa's special clutch cover (die-cast).
●Braided Hose #4
This nylon braided hose has an outer diameter of φ11mm, ideal for small vehicles.
In addition, with an inner diameter of φ5.6mm, it reduces the burden on the oil pump.
Nylon braided hoses are lightweight and flexible, offering excellent freedom of routing.
When installed, the black braided hose gives the vehicle a sleek look.
●Compact Cool Body
The cooler body uses a compact cool system with excellent cooling efficiency.
By installing an oil cooler, the oil temperature rise associated with engine bore-up can be suppressed.
An oil cooler plate and guard are standard equipment.
The compact cool body is available in 3-fin 4-oil line and 4-fin 5-oil line options.

■Compatible Models
HONDA
6V/12V Monkey Gorilla (Z50J-1300017～1510400/Z50J-1600008～/AB27-1000001～1899999)
Monkey (FI) (AB27-1900001～)
*Vehicles equipped with Special Clutch (die-cast)

■Specifications
Type: 3-Fin/Braided Hose #4
Applicable to: Vehicles equipped with Special Clutch (die-cast)

■Notes
*Images are for illustration purposes only. May include products with different sizes and colors.
*Product design and specifications are subject to change without notice. Please be aware.
*Exclusively for vehicles equipped with SP Takegawa's φ27 front fork kit or φ30 front fork kit. The oil cooler stay is attached to the steering stem included with the kit.
*Cannot be installed on SP Takegawa's inverted front fork kit.
*Applicable to vehicles equipped with SP Takegawa's Special Clutch (die-cast). Can also be installed on the Special Clutch (die-cast) used in SP Takegawa's complete engines (primary type).
*When used with SP Takegawa's Special Clutch (die-cast), an oil hole plug or thermostat unit must be installed. Oil will not circulate if nothing is installed.
*Cannot be used simultaneously with normal mufflers or up-mufflers.
*Cannot be installed on SP Takegawa's Special Clutch (sand cast/TYPE-R (WET/DRY)), dry clutches (all types), or Special Clutches without filters.
*For oil quantity, add approximately 40cc for 3-fin or 60cc for 4-fin to the standard oil quantity.
*As this product is made to order, cancellations after placing an order are not possible.
*Due to made-to-order production, delivery may take some time. Also, please note that the manufacturer may discontinue or change specifications without prior notice. Thank you for your understanding.