Skip to product information
1 of 4

FJ1200 Dark Mesh Brake Hose Master Cylinder Set

FJ1200 Dark Mesh Brake Hose Master Cylinder Set

バーテックス(VERTEX)

SKU:y3003-fwd333-10-d1

Regular price ¥26,477
Regular price Sale price ¥26,477
Sale Sold out
Taxes included. Shipping calculated at checkout.
265 points to be awarded
型番
Color (cylinder/lever/tank)
Length
【FJ1200 Mesh Brake Hose Front Rear Clear Hose Smoke Hose Mesh Brake Hose FJ1200 (ABS Not Applicable) Vertex】
This is a great value product that includes a Nissin master cylinder and brake hose set.
Since it is a vehicle-specific set, it can be installed if it is compatible with your vehicle.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, makes speed control easier, and shortens the braking distance.
Since this is a custom part, the routing and length may differ from the genuine parts.
Images are for illustration purposes only.
Depending on the vehicle model, the color or type of the master cylinder shown in some of the images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual included parts vary depending on the vehicle model.
Brake fluid must be purchased separately.

Hose details: Smoke hose, black/black (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
Exclusively for handle outer diameter Φ22.2.
Never use any lever other than the specified one.
Be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, causing fluid leaks or air lock.
Please refer to the main body dimension diagram and make sure that sufficient installation space can be secured.

◆About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid deteriorates over long periods of use by absorbing moisture from the air.
(Note: Fluid deterioration also progresses during storage.)
When the moisture content in the brake fluid increases, it becomes more prone to boiling due to the heat generated during braking, and can corrode components within the hydraulic system, potentially leading to reduced brake or clutch performance and unexpected problems.
Regular replacement every two years is required for normal use.
If significant deterioration is observed, early replacement of the brake fluid is necessary.

Please be sure to check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's website (Daytona) in advance.

Selected manufacturer part numbers:
Daytona 79882 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 79883 (Vertical φ19 Black/Black/Clear Tank)
Daytona 79884 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 79885 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95653 (Vertical φ19 Black/Buff Clear/Smoke Tank)
Daytona 95654 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 96872 (Vertical φ19 Black/Buff Clear/Smoke Tank Short Lever)
Daytona 61745 (Horizontal 5/8 inch Silver/Buff Clear/Clear Tank)
Daytona 61744 (Horizontal 5/8 inch Gold/Buff Clear/Clear Tank)
Daytona 61747 (Horizontal 5/8 inch Black/Buff Clear/Clear Tank)
Daytona 61738 (Horizontal 5/8 inch Black/Black/Clear Tank)
Daytona 61746 (Horizontal 5/8 inch Gold/Black/Clear Tank)
Daytona 62411 (Diagonal Horizontal φ19 Black/Buff Clear/Clear Tank)
Daytona 74751 (Round Integrated 5/8 inch Black/Buff Clear/Clear Tank)

Compatible models: FJ1200 (model year '88-'93) *ABS not applicable

Installation details: Front (2 hoses)

Please make sure to inquire before ordering and check the manufacturer's website, etc.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered or out of stock.
Please confirm the size and design before ordering.
Due to the environment of your PC or mobile phone, the color of the image may differ slightly from the actual product.

適合車種の情報は現在登録されていません。

View full details