FZR1000 Mesh Clutch Hose Master Cylinder Brake Hose FZR1000 89-92 3GM

【FZR1000 Mesh Clutch Hose Master Cylinder Brake Hose FZR1000 89-92 3GM Vertex】
This is a great value product that includes a Nissin master cylinder and clutch hose as a set.
Since it is a vehicle-specific set, it can be installed on compatible vehicles.

Compared to rubber hoses, mesh hoses prevent expansion, reducing brake pedal play, making speed control easier, and shortening the braking distance.
As this is an aftermarket part, the routing and length may differ from the genuine parts.
Images are for illustration purposes only.
Depending on the vehicle model, some of the master cylinder colors and types shown in the images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual included parts vary depending on the vehicle model.
Brake fluid must be prepared separately.

Hose details: Clear hose, blue/red (aluminum) or smoke hose, black/black (aluminum) selection

The clamp holder has a mirror hole (M10×P1.25 right-hand thread included).
Exclusively for handlebar outer diameter Φ22.2.
Never use any lever other than the specified one.
Be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, causing fluid leaks or air-locking.
Refer to the body dimension diagram and ensure that sufficient mounting space can be secured.

◆About Brake Fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades over long-term use by absorbing moisture from the air.
(*Fluid degradation also progresses even when stored.)
If there is a lot of moisture in the brake fluid, it can easily boil due to heat during braking, corrode components within the hydraulic system, and potentially lead to a decrease in brake or clutch performance or unexpected problems.
Regular replacement every two years is required with normal use.
If significant deterioration is observed, early replacement of the brake fluid will be necessary.

Always check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's website (Daytona) beforehand.

Selectable manufacturer part numbers:
Daytona 61752 (Horizontal 5/8 inch Gold/Buff Clear/Clear Tank)
Daytona 61754 (Horizontal 5/8 inch Gold/Black/Clear Tank)
Daytona 61750 (Horizontal 5/8 inch Black/Buff Clear/Clear Tank)
Daytona 61755 (Horizontal 5/8 inch Black/Black/Clear Tank)

Compatible vehicles: FZR1000 (Year 89-92, Model 3GM)

Installation details: Clutch (1 piece)

Always inquire before ordering and confirm on the manufacturer's website, etc.
For detailed product information, please check the manufacturer's website.
Some products may be backordered or out of stock from the manufacturer.
Please confirm the size and design before ordering.
The color of the product image may differ slightly from the actual product due to your PC or mobile phone environment.