1 4

SRX600 Mesh Brake Hose and Master Cylinder Set

SRX600 Mesh Brake Hose and Master Cylinder Set

バーテックス(VERTEX)

y3013-fsd121-10-d16

¥21,913
¥21,913
Sale Sold out
Taxes included. Shipping calculated at checkout.
220 points to be awarded
Model number
Color (Cylinder/Lever/Tank)
Length
【SRX600 Mesh Brake Hose Front Rear Clear Hose Smoke Hose Mesh Brake Hose SRX600 90- Vertex】
This great value product includes a Nissin master cylinder and brake hose set.
Since it is a vehicle-specific set, it can be installed on compatible vehicles.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, makes speed control easier, and shortens braking distance.
As these are custom parts, the routing and length may differ from genuine parts.
The images are for illustration purposes only.
Depending on the vehicle model, some of the master cylinder colors and types shown in the images may not be available for selection.
Sets that are not available for selection cannot be sold.
The actual included parts vary depending on the vehicle model.
Brake fluid must be purchased separately.

Hose details: Clear hose, blue/red (aluminum)

Clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
Exclusively for handlebars with an outer diameter of Φ22.2.
Never use any lever other than the specified one.
If the air bleeder is overtightened, the bleeder hole or tip may be crushed, causing fluid leakage or air in the system. Please be careful.
Please refer to the main body dimension diagram and make sure there is sufficient installation space.

◆About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid deteriorates by absorbing moisture from the air with long-term use.
(※Fluid deterioration also progresses even when stored.)
An increase in moisture content in the brake fluid can make it more prone to boiling due to heat during braking, rust components within the hydraulic system, and potentially lead to a decrease in brake or clutch performance or unexpected problems.
Regular replacement every two years is required for normal use.
If significant deterioration is observed, early replacement of the brake fluid will be necessary.

Please be sure to check the specifications and instruction manual of the master cylinder you plan to purchase in advance on the manufacturer's website (Daytona).

Selected manufacturer part numbers:
Daytona 79886 (Vertical φ17 Black/Buff Clear/Clear Tank)
Daytona 79887 (Vertical φ17 Black/Black/Clear Tank)
Daytona 79888 (Vertical φ17 Gold/Buff Clear/Clear Tank)
Daytona 79889 (Vertical φ17 Gold/Black/Clear Tank)
Daytona 61741 (Horizontal 14mm Silver/Buff Clear/Clear Tank)
Daytona 61760 (Horizontal 14mm Gold/Buff Clear/Clear Tank)
Daytona 61743 (Horizontal 14mm Gold/Black/Clear Tank)
Daytona 61740 (Horizontal 14mm Black/Buff Clear/Clear Tank)
Daytona 61759 (Horizontal 14mm Black/Black/Clear Tank)
Daytona 74753 (Round Integral 14mm Black/Buff Clear/Clear Tank)

Compatible models: SRX600 (Model year 90-97, Model type 1JK/3SX)

Installation details: Front (1 piece)

Please inquire or check the manufacturer's website before ordering.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered or out of stock from the manufacturer.
Please be sure to check the size and design before ordering.
The color of the actual product may differ slightly from the image due to your PC or mobile phone environment.

適合車種の情報は現在登録されていません。

View full details