FZR750 Mesh Clutch Hose Master Cylinder Brake Hose FZR750 88 2LM

【FZR750 Mesh Clutch Hose Master Cylinder Brake Hose FZR750 88 2LM Vertex】
This is a great value product that includes a Nissin master cylinder and clutch hose set.
Since it is a vehicle-specific set, it can be installed if it is compatible with your vehicle.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, makes speed control easier, and shortens braking distance.
As these are custom parts, the routing and length may differ from genuine parts.
The image is for illustrative purposes only.
Depending on the vehicle model, some master cylinder colors or types shown in the images may not be available for selection.
Sets that are not available for selection cannot be sold.
The actual included parts will vary depending on the vehicle model.
Brake fluid must be purchased separately.

Hose details: Clear hose, blue/red (aluminum) or smoke hose, black/black (aluminum) selection

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
Exclusively for handlebars with an outer diameter of Φ22.2.
Never use levers other than the specified ones.
Please be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, causing fluid leaks or air entrapment.
Please refer to the main unit dimension diagram and make sure there is sufficient installation space.

◆ About Brake Fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades over long periods of use by absorbing moisture from the air.
(*Fluid degradation also progresses even when stored.)
If the moisture content in the brake fluid increases, it can easily boil due to the heat generated during braking, rust components within the hydraulic system, and potentially lead to reduced performance of the brake or clutch, or unexpected problems.
Regular replacement is required every two years under normal use.
If significant degradation is observed, early replacement of the brake fluid is necessary.

Always check the specifications and instruction manual for the master cylinder you plan to purchase on the manufacturer's (Daytona) website in advance.

Selected Manufacturer Part Numbers:
Daytona 61752 (Horizontal 5/8 inch Gold/Buff Clear/Clear Tank)
Daytona 61754 (Horizontal 5/8 inch Gold/Black/Clear Tank)
Daytona 61750 (Horizontal 5/8 inch Black/Buff Clear/Clear Tank)
Daytona 61755 (Horizontal 5/8 inch Black/Black/Clear Tank)

Compatible models: FZR750 (Year 88, Model 2LM)

Installation details: Clutch (1 piece)

Please inquire or check the manufacturer's website before ordering.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered or out of stock.
Please confirm the size and design before ordering.
The color of the product in the image may differ slightly due to the environment of your PC or mobile phone.