1 4

FZR400 Mesh Brake Hose Master Cylinder Set

FZR400 Mesh Brake Hose Master Cylinder Set

バーテックス(VERTEX)

y3060-fwd121-10-d1

¥26,477
¥26,477
Sale Sold out
Taxes included. Shipping calculated at checkout.
265 points to be awarded
Model number
Color (Cylinder/Lever/Tank)
Length
【FZR400 Mesh Brake Hose Front Rear Clear Hose Smoke Hose Mesh Brake Hose FZR400 86-88 Vertex】
This is a great value product that includes a Nissin master cylinder and brake hose set.
Since it is a vehicle-specific set, it can be installed if it is compatible with your vehicle.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, makes speed control easier, and shortens braking distance.
As this is a custom part, the routing and length may differ from the genuine parts.
The images are for illustration purposes only.
Depending on the vehicle, the color or type of master cylinder shown in some images may not be available for selection.
Sets that are not available for selection cannot be sold.
The actual included parts vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Clear hose, blue/red (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 regular thread included).
For handlebars with an outer diameter of Φ22.2 only.
Never use any levers other than the specified ones.
Be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, leading to fluid leaks or air locking.
Please refer to the main body dimension diagram and ensure that there is sufficient installation space.

◆ About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades over long periods of use by absorbing moisture from the air.
(Note: Fluid degradation also progresses even in storage.)
If the brake fluid contains too much moisture, it can easily boil due to the heat generated during braking, or rust the components within the hydraulic system, which can lead to reduced brake or clutch performance or unexpected problems.
Regular replacement is required every two years under normal use.
If significant deterioration is observed, early replacement of the brake fluid is necessary.

Please be sure to check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's website (Daytona) in advance.

Selected manufacturer part numbers:
Daytona 79882 (Vertical type φ19 Black/Buff Clear/Clear Tank)
Daytona 79883 (Vertical type φ19 Black/Black/Clear Tank)
Daytona 79884 (Vertical type φ19 Gold/Buff Clear/Clear Tank)
Daytona 79885 (Vertical type φ19 Gold/Black/Clear Tank)
Daytona 95653 (Vertical type φ19 Black/Buff Clear/Smoke Tank)
Daytona 95654 (Vertical type φ19 Black/Black/Smoke Tank)
Daytona 96872 (Vertical type φ19 Black/Buff Clear/Smoke Tank Short Lever)
Daytona 61745 (Horizontal type 5/8 inch Silver/Buff Clear/Clear Tank)
Daytona 61744 (Horizontal type 5/8 inch Gold/Buff Clear/Clear Tank)
Daytona 61747 (Horizontal type 5/8 inch Black/Buff Clear/Clear Tank)
Daytona 61738 (Horizontal type 5/8 inch Black/Black/Clear Tank)
Daytona 61746 (Horizontal type 5/8 inch Gold/Black/Clear Tank)
Daytona 62411 (Diagonal Horizontal type φ19 Black/Buff Clear/Clear Tank)
Daytona 74751 (Round Integrated type 5/8 inch Black/Buff Clear/Clear Tank)

Compatible model: FZR400 (model year 86-89, model 1WG)

Installation details: Front (2 hoses)

Please inquire or check the manufacturer's website before ordering.
For detailed product information, please check the manufacturer's website.
Some products may be backordered or discontinued by the manufacturer.
Please check the size and design before ordering.
Due to the environment of your PC or mobile phone, the color of the image may differ slightly from the actual product.

適合車種の情報は現在登録されていません。

View full details