1 4

FZR400 Dark Mesh Brake Hose Master Cylinder Set

FZR400 Dark Mesh Brake Hose Master Cylinder Set

バーテックス(VERTEX)

y3060-fwd333-10-d1

¥26,477
¥26,477
Sale Sold out
Taxes included. Shipping calculated at checkout.
265 points to be awarded
型番
Color (cylinder/lever/tank)
Length
【FZR400 Mesh Brake Hose Front Rear Clear Hose Smoke Hose Mesh Brake Hose FZR400 86-88 Vertex】
This is a great value product that includes a Nissin master cylinder and brake hose set.
Since it is a vehicle-specific set, it can be installed if it is a compatible vehicle.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, making speed control easier and shortening braking distance.
As this is a custom part, the routing and length may differ from genuine parts.
Images are for illustration purposes only.
Depending on the vehicle model, some of the master cylinder colors and types shown in the images may not be available for selection.
Sets that are not available for selection cannot be sold.
The actual included parts will vary depending on the vehicle model.
Brake fluid must be prepared separately.

Hose details: Smoke hose, black/black (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 standard thread included).
For handlebars with an outer diameter of Φ22.2 only.
Never use any lever other than the specified one.
Be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, causing fluid leaks or air lock.
Please refer to the main body dimension diagram and ensure that sufficient installation space can be secured.

◆ About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades over long-term use by absorbing moisture from the air.
(※Fluid degradation also progresses even when stored.)
If there is too much moisture in the brake fluid, it may boil easily due to the heat generated during braking, or corrode components in the hydraulic system, leading to decreased performance of the brake or clutch, or unexpected problems.
Regular replacement is required every two years under normal use.
If significant degradation is observed, early replacement of the brake fluid is necessary.

Always check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's website (Daytona) beforehand.

Selected manufacturer part numbers:
Daytona 79882 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 79883 (Vertical φ19 Black/Black/Clear Tank)
Daytona 79884 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 79885 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95653 (Vertical φ19 Black/Buff Clear/Smoke Tank)
Daytona 95654 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 96872 (Vertical φ19 Black/Buff Clear/Smoke Tank Short Lever)
Daytona 61745 (Horizontal 5/8 inch Silver/Buff Clear/Clear Tank)
Daytona 61744 (Horizontal 5/8 inch Gold/Buff Clear/Clear Tank)
Daytona 61747 (Horizontal 5/8 inch Black/Buff Clear/Clear Tank)
Daytona 61738 (Horizontal 5/8 inch Black/Black/Clear Tank)
Daytona 61746 (Horizontal 5/8 inch Gold/Black/Clear Tank)
Daytona 62411 (Diagonal Horizontal φ19 Black/Buff Clear/Clear Tank)
Daytona 74751 (Round Integrated 5/8 inch Black/Buff Clear/Clear Tank)

Compatible models: FZR400 (Year 86-89, Model 1WG)

Installation details: Front (2 hoses)

Please inquire before ordering and check the manufacturer's website, etc.
For detailed product information, please check the manufacturer's website.
Some products may be backordered or discontinued by the manufacturer.
Please check the size and design carefully before ordering.
The color of the product in the image may differ slightly from the actual product due to the environment of your PC or mobile phone.

適合車種の情報は現在登録されていません。

View full details