1 4

TZR250 Mesh Brake Hose & Master Cylinder Set

TZR250 Mesh Brake Hose & Master Cylinder Set

バーテックス(VERTEX)

y3080-fsd121-10-d16

¥21,913
¥21,913
Sale Sold out
Taxes included. Shipping calculated at checkout.
220 points to be awarded
Model number
Color (Cylinder/Lever/Tank)
Length
[TZR250 Mesh Brake Hose Master Cylinder Set Front TZR250 86-88 2XT Vertex]
This is a great value product that includes a Nissin master cylinder and brake hose as a set.
Since it is a vehicle-specific set, it can be installed on compatible vehicles.

Compared to rubber hoses, mesh hoses prevent expansion, reducing brake pedal play, making speed control easier, and shortening braking distance.
As these are custom parts, the routing and length may differ from genuine parts.
The image is for illustrative purposes only.
Depending on the model, the color or type of master cylinder shown in some images may not be available for selection.
Sets that are not available for selection cannot be sold.
The actual included parts vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Clear hose, Blue/Red (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
For handlebars with an outer diameter of Φ22.2 only.
Never use any levers other than the specified ones.
Be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, causing fluid leaks or air locking.
Please refer to the main body dimension diagram to ensure sufficient installation space is secured.

◆About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid deteriorates over long periods of use by absorbing moisture from the air.
(*Fluid deterioration progresses even during storage.)
If there is too much moisture in the brake fluid, it may boil easily due to the heat generated during braking, or rust components within the hydraulic system, potentially leading to reduced brake or clutch performance or unexpected problems.
Regular replacement is required every two years under normal use.
If significant deterioration is observed, early replacement of the brake fluid will be necessary.

Please be sure to check the specifications and instruction manual on the manufacturer's website (Daytona) for the master cylinder you plan to purchase in advance.

Selected manufacturer part numbers:
Daytona 79886 (Vertical φ17 Black/Buff Clear/Clear Tank)
Daytona 79887 (Vertical φ17 Black/Black/Clear Tank)
Daytona 79888 (Vertical φ17 Gold/Buff Clear/Clear Tank)
Daytona 79889 (Vertical φ17 Gold/Black/Clear Tank)
Daytona 61741 (Horizontal 14mm Silver/Buff Clear/Clear Tank)
Daytona 61760 (Horizontal 14mm Gold/Buff Clear/Clear Tank)
Daytona 61743 (Horizontal 14mm Gold/Black/Clear Tank)
Daytona 61740 (Horizontal 14mm Black/Buff Clear/Clear Tank)
Daytona 61759 (Horizontal 14mm Black/Black/Clear Tank)
Daytona 74753 (Round Integral 14mm Black/Buff Clear/Clear Tank)

Compatible models: TZR250 (Years 86-88, Model 2XT)

Installation details: Front (1 hose)

Please inquire before ordering, and check the manufacturer's website, etc.
For more detailed information, please check the manufacturer's website.
Some products may be out of production due to manufacturer backorder, or may be out of stock.
Please be sure to check the size and design before ordering.
The color of the product image may differ slightly from the actual product due to the environment of your PC or mobile phone.

適合車種の情報は現在登録されていません。

View full details