Brake pads Sintered ceramic

【ZCOO ZRM-B003 Brake Pads Ceramic Sintered Motorcycle Parts Custom Parts Brake Related Parts】
■Product Description
Ceramic sintered brake pads that provide braking power proportional to how hard you squeeze the lever.
These pads were developed and designed to provide braking force gradually, like tightening a silk thread, rather than an abrupt "on/off" braking feel.
Furthermore, to achieve smooth and precise deceleration, we pursued a "comfortable deceleration experience" where the bike decelerates more than the rider perceives.
Since there is less temperature dependency (※1), which is common in racing brake pads, you can use them safely on public roads.
(※1) This refers to the phenomenon where braking power is not achieved unless a certain temperature range is reached.

■Specifications
Size: 40.5 x 35.2

■Other Precautions
・Brake pads are important safety parts, so replacement and installation should be performed by a certified garage and qualified personnel. When replacing/installing at your own risk, it is mandatory to record the maintenance details in the maintenance logbook and keep it with the vehicle. Please note that we will not be held responsible for any accidents caused by malfunctions associated with the replacement.
・Brake-related parts immediately after driving are hot. Please ensure that the pads and rotors are completely cool before performing replacement work.
・Pads contain fibers and may prick your hands. Always wear work gloves when performing replacement work.
・Brake pads are consumable parts. Always replace them when the friction material wears down to 2mm.
・Before replacing the brake pads, always confirm that the brake pads and vehicle compatibility are correct. Never install, use, modify, or process the product for applications other than the applicable vehicle.
・When replacing pads, be careful not to get oil, dust, or other foreign matter on the surface.
・For vehicles with double disc specifications, always replace the brake pads on both sides simultaneously.
・When installing (replacing) brake pads, refer to the service manual and check for scratches, ruptures, deformation, or abnormal friction material on the rotors, brake hoses, etc.
・After replacing the brake pads, perform sufficient bedding-in until the sliding surfaces are in uniform contact. Immediately after replacement, the friction surfaces of the pads and rotors are not in full contact, so the original braking force cannot be obtained.
・When replacing, simultaneously inspect the brake fluid (oil), calipers, rotors, etc. The performance of brake pads is greatly affected by the quality of caliper maintenance, etc., so if there are any defects or malfunctions, take appropriate measures promptly.
・Using pads that exceed the wear limit can damage the rotor and lead to accidents, so regularly check the remaining pad material and for any other damage. If any abnormalities are found, it is extremely dangerous, so stop using them.
・Be careful not to subject the brake pads to impacts such as dropping. This can damage the product, prevent it from achieving its original braking performance, and potentially lead to accidents depending on the situation. Handle with extreme care.
・Do not use sintered grip pads on cast iron discs (rotors).

■Notes
*Images are for illustration purposes only. Includes products with different sizes and colors.
*Product design and specifications are subject to change without notice. Please understand.