Brake pads Sintered ceramic

【ZCOO ZRM-N004 Brake Pads Ceramic Sintered Motorcycle Parts Custom Parts Brake Related Parts】
■Product Description
Experience braking proportionate to your grip with ceramic sintered brake pads.
These pads are developed and designed to provide braking power that increases smoothly with grip, rather than an abrupt, sudden stop.
Furthermore, to enable smooth deceleration as intended, we pursued a "comfortable decelerating feel" where the bike slows down more than the rider perceives.
Since they have low temperature dependency (※1), which is common in racing brake pads, they can be used safely on public roads.
(※1) Refers to a situation where braking power is not achieved unless a certain temperature range is reached.

■Specifications
Size: 55.3×75.0

■Other Notes
・Brake pads are critical safety components, so we recommend that replacement and installation be performed by a certified garage or qualified personnel. When replacing/installing under your own responsibility, it is mandatory to record the maintenance details in the maintenance logbook and keep it with the vehicle. Please note that we are not liable for any accidents caused by defects resulting from replacement.
・Brake-related parts are hot immediately after riding. Please ensure that the pads and rotors are completely cool before performing replacement work.
・Pads contain fibers and may prick your hands. Always wear work gloves when performing replacement work.
・Brake pads are consumables. If the friction material wears down to 2mm, they must be replaced.
・Before replacing the brake pads, please ensure that the brake pads and the vehicle are compatible. Never install or use them on incompatible vehicles, or modify/process the product.
・When replacing pads, be careful to prevent oil, dust, or other contaminants/foreign matter from adhering to the surface.
・For vehicles with dual disc specifications, always replace the brake pads on both sides simultaneously.
・When installing (replacing) brake pads, refer to the service manual and check for any scratches, ruptures, deformation, or abnormal material on the rotor, brake hose, etc.
・After replacing the brake pads, perform sufficient break-in driving until the sliding surfaces make even contact. Immediately after replacement, the worn surfaces of the pads and rotor are not in complete contact, so the original braking power cannot be obtained.
・When replacing, simultaneously inspect the brake fluid (oil), calipers, rotors, etc. The performance of brake pads is greatly affected by the quality of caliper maintenance, so if there are any defects or malfunctions, take appropriate measures immediately.
・Using pads beyond their wear limit can damage the rotor and lead to accidents, so regularly check the remaining pad thickness and for any other damage. If any abnormality is found, it is very dangerous, so discontinue use.
・Be careful not to subject brake pads to impacts such as dropping. This can cause damage to the product, prevent it from achieving its original braking performance, and in some situations, lead to accidents. Handle with extreme care.
・Do not use sintered grip pads with cast iron discs (rotors).

■Notes
※Images are for illustration purposes only. They include products of different sizes and colors.
※Product design and specifications are subject to change without notice. Please understand.