Brake pads Sintered ceramic

【ZCOO ZRM-N006 Brake Pads Ceramic Sintered Motorcycle Parts Custom Parts Brake Related Parts】
■Product Description
Ceramic sintered brake pads that provide braking power proportional to how much you squeeze them.
These pads were developed and set to provide braking power that builds gradually, like tightening a silken thread, rather than an abrupt "gutsy" stop.
Furthermore, we pursued a "pleasant deceleration experience" where the bike decelerates more smoothly and effectively than the rider perceives, allowing for precise, controlled braking.
Since they exhibit less temperature dependency (※1) that is common in racing brake pads, they can be used safely on public roads.
(※1) Refers to the phenomenon where braking effectiveness is not achieved until a certain temperature range is reached.

■Specifications
Size: 49.5×38.0

■Other Notes
・Brake pads are critical safety components; therefore, replacement and installation should be performed by certified workshops and qualified personnel. When performing replacement and installation under your own responsibility, it is mandatory to record the maintenance details in the vehicle's maintenance logbook and keep it with the vehicle. Please note that we are not responsible for any accidents caused by defects resulting from the replacement.
・Brake-related parts are hot immediately after driving. Please ensure that the pads and rotors are completely cool before performing replacement work.
・Pads contain fibers and may splinter the skin. Always wear work gloves when performing replacement work.
・Brake pads are consumables. Always replace them when the friction material has worn down to 2mm.
・Before replacing brake pads, always confirm that the brake pads are compatible with your vehicle. Never install, use, modify, or process products for applications other than the specified vehicle.
・When replacing pads, be careful not to allow oil, dust, or other contaminants/foreign objects to adhere to the surface.
・For vehicles with double disc specifications, always replace the brake pads on both sides simultaneously.
・When installing (replacing) brake pads, refer to the service manual and check the rotors and brake hoses for scratches, ruptures, deformation, or abnormal friction material.
・After replacing brake pads, perform sufficient break-in driving until the sliding surfaces make even contact. Immediately after replacement, the pad and rotor wear surfaces are not in full contact, so the original braking force cannot be obtained.
・When replacing pads, simultaneously inspect the brake fluid (oil), calipers, rotors, etc. The performance of brake pads is greatly affected by the quality of caliper maintenance, so if there are any deficiencies or malfunctions, take appropriate measures promptly.
・Using pads beyond their wear limit can damage the rotors and lead to accidents, so regularly check the remaining pad material and for any other damage. If any abnormality is found, it is extremely dangerous, so discontinue use.
・Be careful to avoid impacts such as dropping brake pads. Such impacts can damage the product, prevent it from achieving its original braking performance, and potentially lead to accidents. Handle with extreme care.
・Do not use sintered grip pads with cast iron discs (rotors).

■Notes
*Images are for illustration purposes only. They may include products of different sizes or colors.
*Product design and specifications are subject to change without notice. Thank you for your understanding.