Brake pads Sintered ceramic

【ZCOO ZRM-N007 Brake Pads, Ceramic Sintered, Motorcycle Parts, Custom Parts, Brake Related Parts】
■Product Description
Ceramic sintered brake pads that deliver braking power proportional to how hard you squeeze the lever.
These pads were developed and designed to provide braking power that increases smoothly as you squeeze the lever, rather than an abrupt, sudden stop.
Furthermore, to allow for smooth and precise deceleration, we pursued a "comfortable deceleration experience" where the rider perceives less deceleration than what is actually occurring.
Since there is little temperature dependency (※1) often seen in racing brake pads, you can use them safely on public roads.
(※1) This refers to the phenomenon where braking effectiveness is not achieved until a certain temperature range is reached.

■Specifications
Size: 39.0 x 101.5

■Other Precautions
・Brake pads are critical safety components, so we recommend that replacement and installation be performed by a certified garage and qualified personnel. When performing replacement and installation at your own risk, you are obligated to always record the maintenance details in the vehicle maintenance record book and keep it in the vehicle. Please note that we will not be held responsible for any accidents caused by defects resulting from the replacement.
・Brake-related components are hot immediately after driving. Please ensure that the pads and rotors are completely cool before performing replacement work.
・Pads contain fibers that can splinter into your hands. Always wear work gloves when performing replacement work.
・Brake pads are consumables. Always replace them when the friction material has worn down to 2mm.
・Before replacing brake pads, always confirm that the brake pads and vehicle compatibility are correct. Absolutely do not install, use, modify, or process the product for applications other than the specified vehicles.
・When replacing pads, be careful not to allow oil, dust, or other contaminants/foreign matter to adhere to the surface.
・For vehicles with double disc specifications, always replace the brake pads on both sides simultaneously.
・When installing (replacing) brake pads, refer to the service manual and check for any scratches, ruptures, deformation, or abnormal wear on the rotors, brake hoses, etc.
・After replacing brake pads, perform sufficient bedding-in until the sliding surfaces are in uniform contact. Immediately after replacement, the friction surfaces of the pads and rotors are not in complete contact, so the original braking force cannot be obtained.
・When replacing, simultaneously inspect the brake fluid (oil), calipers, rotors, etc. The performance of brake pads is greatly affected by the quality of caliper maintenance, so if any defects or malfunctions are found, take appropriate action promptly.
・Using pads beyond their wear limit can damage the rotor and potentially lead to accidents, so please regularly check the remaining pad material and for any other damage. If any abnormality is found, it is very dangerous, so discontinue use.
・Be very careful to avoid applying impact, such as dropping, to the brake pads. This can cause damage to the product, prevent the original braking capability from being obtained, and potentially lead to accidents depending on the situation. Handle with extreme care.
・Sintered grip pads should not be used with cast iron discs (rotors).

■Notes
※The image is for illustrative purposes only. It includes products of different sizes and colors.
※Product design and specifications are subject to change without notice. Please understand.