Brake pads Sintered ceramic

【ZCOO ZRM-N011 Brake Pads Ceramic Sintered Motorcycle Parts Custom Parts Brake-related Parts】
■Product Description
Ceramic sintered brake pads that provide braking proportional to how much you squeeze the lever.
These pads were developed and set to provide braking power that is not an abrupt "grab," but rather a smooth, progressive effect that increases with the pressure applied, much like tightening a silken thread.
Furthermore, to achieve a smooth and predictable deceleration, we pursued a "comfortable deceleration sensation" that allows the rider to feel more deceleration than they perceive.
Since they have little temperature dependency (※1), which is common with racing brake pads, they can be used with confidence on public roads.
(※1) Refers to the phenomenon where braking power is not fully exerted unless a certain temperature range is reached.

■Specifications
Size: 42.0×77.0/42.0×96.7

■Other Precautions
・Brake pads are important safety parts, so replacement and installation are recommended to be performed by a certified garage and/or qualified personnel. When performing replacement and installation under your own responsibility, it is mandatory to record the maintenance details in the maintenance logbook and keep it with the vehicle. Please note that we will not be held responsible for any accidents caused by defects resulting from the replacement.
・Brake-related parts are hot immediately after driving. Please ensure that the pads and rotors have completely cooled before performing replacement work.
・Pads contain fibers that may pierce your hands. Always wear work gloves when performing replacement work.
・Brake pads are consumables. Always replace them when the friction material wears down to 2mm.
・Before replacing brake pads, always confirm that the brake pads and vehicle compatibility are correct. Do not under any circumstances install, use, modify, or process the product for applications other than those specified.
・When replacing pads, be careful not to get oil, dust, or other contaminants/foreign objects on the surface.
・For vehicles with dual disc specifications, always replace the brake pads on both sides simultaneously.
・When installing (replacing) brake pads, refer to the service manual and check for scratches, ruptures, deformation, or abnormal friction material on the rotors, brake hoses, etc.
・After replacing brake pads, perform sufficient break-in driving until the sliding surfaces make uniform contact. Immediately after replacement, the pads and rotors may not be in complete contact, so full braking power will not be achieved.
・When replacing, simultaneously inspect the brake fluid (oil), calipers, rotors, etc. The performance of brake pads is greatly affected by the quality of maintenance of the calipers, etc., so if any deficiencies or malfunctions are found, take appropriate action promptly.
・Using pads beyond their wear limit can damage the rotors and lead to accidents, so regularly check the remaining pad material and for any other damage. If any abnormality is found, it is extremely dangerous, so stop using them immediately.
・Be careful to prevent impacts such as dropping the brake pads. This could cause damage to the product, prevent it from achieving its original braking performance, and potentially lead to accidents depending on the situation. Handle with extreme care.
・Sintered grip pads should not be used with cast iron discs (rotors).

■Notes
※Images are for illustration purposes only. They may include products of different sizes or colors.
※Product design and specifications may change without prior notice. Please understand.