Brake pads Sintered ceramic

【ZCOO ZRM-S001 Brake Pads Ceramic Sintered Motorcycle Parts Custom Parts Brake Related Parts】
■Product Description
Ceramic sintered brake pads that offer braking proportional to the pressure applied to the lever.
These pads were developed and set to provide braking power that increases gradually as you squeeze the lever, rather than an abrupt, sudden stop.
Furthermore, we pursued a "comfortable deceleration experience" that makes the rider feel like they are decelerating more smoothly and effectively than they perceive, allowing for precise and smooth deceleration.
They also have low temperature dependency (※1), which is common in racing brake pads, making them safe for use on public roads.
(※1) This refers to the phenomenon where braking power is not fully effective until a certain temperature range is reached.

■Specifications
Size: 50.5 x 69.5

■Other Precautions
・Brake pads are important safety-critical parts, so we recommend that replacement and installation be carried out by a certified garage and qualified personnel. When performing replacement and installation under your own responsibility, it is mandatory to record the maintenance details in the inspection and maintenance logbook and keep it with the vehicle. Please note that we are not responsible for any accidents caused by defects resulting from replacement.
・Brake-related parts immediately after driving are hot. Please confirm that the pads and rotors are completely cool before performing replacement work.
・Pads contain fibers and may prick your hands. Always wear work gloves when performing replacement work.
・Brake pads are consumables. Always replace them when the friction material wears down to 2mm.
・Before replacing the brake pads, always confirm that the brake pads and vehicle compatibility are correct. Never install, use, modify, or process the product for vehicles other than those for which it is applicable.
・When replacing pads, be careful not to get oil, dust, or other foreign matter on the surface.
・For vehicles with double disc specifications, always replace the brake pads on both sides simultaneously.
・When installing (replacing) brake pads, refer to the service manual and check for scratches, ruptures, deformation, or abnormal material on the rotors, brake hoses, etc.
・After replacing the brake pads, perform sufficient bedding-in until the sliding surfaces are evenly in contact. Immediately after replacement, the friction surfaces of the pads and rotors are not in complete contact, so the original braking force cannot be obtained.
・When replacing, simultaneously inspect the brake fluid (oil), calipers, rotors, etc. The performance of brake pads is greatly affected by the quality of caliper maintenance, etc., so if there are any defects or problems, take appropriate action promptly.
・Using pads that have exceeded their wear limit can damage the rotors and lead to accidents, so regularly check the remaining pad material and for other damage. If any abnormality is found, it is very dangerous, so discontinue use.
・Be careful to avoid impacts, such as dropping, on the brake pads. This can cause damage to the product, prevent the original braking ability from being obtained, and in some situations, lead to accidents. Handle with extreme care.
・Do not use sintered grip pads on cast iron discs (rotors).

■Notes
※The image is for illustration purposes. It includes products with different sizes and colors.
※Product designs and specifications are subject to change without notice. Please understand.