Brake pads Sintered ceramic

【ZCOO ZRM-T001 Brake Pads Ceramic Sintered Motorcycle Parts Custom Parts Brake Related Parts】
■Product Description
Ceramic sintered brake pads that provide braking power proportional to how hard you grip them.
These pads were developed and set to provide braking power that builds up gradually the harder you grip, rather than an abrupt "grab."
Furthermore, to achieve smooth deceleration as intended, we pursued "comfortable deceleration feedback" where the deceleration feels more pronounced than the rider perceives.
Since they have low temperature dependency (*1), which is common in racing brake pads, you can use them safely on public roads.
(*1) Refers to the phenomenon where braking power is not fully achieved unless a certain temperature range is reached.

■Specifications
Size: 46.0×69.7

■Other Precautions
・Brake pads are critical safety parts, so it is recommended that replacement and installation be performed by a certified garage and qualified personnel. When replacing/installing at your own risk, it is mandatory to record the maintenance details in the maintenance logbook and keep it with the vehicle. Please note that we will not be held responsible for any accidents caused by defects arising from the replacement.
・Brake-related parts are hot immediately after driving. Please ensure the pads and rotors are completely cool before performing replacement work.
・Pads contain fibers that may prick your hands. Always wear work gloves when performing replacement work.
・Brake pads are consumables. If the friction material wears down to 2mm, they must be replaced.
・Before replacing brake pads, always confirm that the brake pads are correct for the vehicle. Never install, use, modify, or process the product for applications other than the intended vehicle.
・When replacing pads, be careful not to get oil, dust, or other contaminants/foreign matter on the surface.
・For vehicles with double disc specifications, always replace brake pads on both sides simultaneously.
・When installing (replacing) brake pads, refer to the service manual and check for scratches, ruptures, deformation, or abnormal friction material on the rotor, brake hose, etc.
・After replacing brake pads, perform sufficient break-in driving until the sliding surfaces make uniform contact. Immediately after replacement, the wear surfaces of the pads and rotor are not in complete contact, so the original braking force cannot be obtained.
・When replacing, simultaneously inspect the brake fluid (oil), calipers, rotors, etc. The performance of brake pads is greatly affected by the quality of caliper maintenance, so if there are any defects or malfunctions, take appropriate measures promptly.
・Using pads that have exceeded their wear limit can damage the rotors and lead to accidents, so regularly check the remaining pad material and for other damage. If any abnormalities are found, discontinue use immediately as it is very dangerous.
・Be careful to avoid impacts such as dropping the brake pads. This can damage the product, prevent it from achieving its original braking performance, and potentially lead to accidents depending on the situation. Handle with extreme care.
・Do not use sintered grip pads on cast iron discs (rotors).

■Notes
*Images are for illustration purposes only. Includes products of different sizes and colors.
*Product design and specifications are subject to change without notice. Thank you for your understanding.